Outline
Comptes Rendus

Biological modelling / Biomodélisation
Mathematical model for optimal control in wastewater discharges: the global performance
Comptes Rendus. Biologies, Volume 328 (2005) no. 4, pp. 327-336.

Abstracts

In this work we show how mathematical models and optimal control techniques can help us to solve some problems of environmental engineering, more precisely, water pollution problems arising from wastewater discharges into coastal areas or rivers. We deal with a complete two-dimensional mathematical model for the evolution of pollutant concentration in a shallow water domain. By integrating this model we obtain a zero-dimensional one and we use it to study the global performance of the system in a realistic situation. Finally, by using the two-dimensional model, we recall two optimal control problems related to the wastewater disposal problem.

On considère des modèles mathématiques et des techniques de contrôle optimisées pour l'étude de quelques problèmes environnementaux et, plus précisément, des problèmes de pollution de la côte et des rivières par les eaux résiduelles. Nous proposons un modèle mathématique bidimensionnel de l'évolution de la concentration en polluants dans un domaine d'eaux peu profondes. Par l'intégration de ce modèle, on obtient un modèle adimensionnel, que nous utilisons pour l'étude de la performance globale du système dans une situation réaliste. Enfin, en utilisant des modèles bidimensionnels, on étudie deux problèmes de contrôle optimal liés à la gestion des eaux d'égout.

Metadata
Received:
Accepted:
Published online:
DOI: 10.1016/j.crvi.2004.08.010
Keywords: Pollution, Wastewater, Environment, Modelling
Mots-clés : Pollution, Eaux d'égout, Environnement, Modélisation

Lino José Alvarez-Vázquez 1; Áurea Martínez 1; Carmen Rodríguez 2; Miguel Ernesto Vázquez-Méndez 3

1 Depto. de Matemática Aplicada II, Universidad de Vigo, ETSI, Telecomunicación, Lagoas-Marcosende, 36200 Vigo, Spain
2 Depto. de Matemática Aplicada, Universidad de Santiago de Compostela, Facultad de Matemáticas, Campus Sur, 15706 Santiago de Compostela, Spain
3 Depto. de Matemática Aplicada, Universidad de Santiago de Compostela, Escola Politécnica Superior, Campus Universitario, 27002 Lugo, Spain
@article{CRBIOL_2005__328_4_327_0,
     author = {Lino Jos\'e Alvarez-V\'azquez and \'Aurea Mart{\'\i}nez and Carmen Rodr{\'\i}guez and Miguel Ernesto V\'azquez-M\'endez},
     title = {Mathematical model for optimal control in wastewater discharges: the global performance},
     journal = {Comptes Rendus. Biologies},
     pages = {327--336},
     publisher = {Elsevier},
     volume = {328},
     number = {4},
     year = {2005},
     doi = {10.1016/j.crvi.2004.08.010},
     language = {en},
}
TY  - JOUR
AU  - Lino José Alvarez-Vázquez
AU  - Áurea Martínez
AU  - Carmen Rodríguez
AU  - Miguel Ernesto Vázquez-Méndez
TI  - Mathematical model for optimal control in wastewater discharges: the global performance
JO  - Comptes Rendus. Biologies
PY  - 2005
SP  - 327
EP  - 336
VL  - 328
IS  - 4
PB  - Elsevier
DO  - 10.1016/j.crvi.2004.08.010
LA  - en
ID  - CRBIOL_2005__328_4_327_0
ER  - 
%0 Journal Article
%A Lino José Alvarez-Vázquez
%A Áurea Martínez
%A Carmen Rodríguez
%A Miguel Ernesto Vázquez-Méndez
%T Mathematical model for optimal control in wastewater discharges: the global performance
%J Comptes Rendus. Biologies
%D 2005
%P 327-336
%V 328
%N 4
%I Elsevier
%R 10.1016/j.crvi.2004.08.010
%G en
%F CRBIOL_2005__328_4_327_0
Lino José Alvarez-Vázquez; Áurea Martínez; Carmen Rodríguez; Miguel Ernesto Vázquez-Méndez. Mathematical model for optimal control in wastewater discharges: the global performance. Comptes Rendus. Biologies, Volume 328 (2005) no. 4, pp. 327-336. doi : 10.1016/j.crvi.2004.08.010. https://comptes-rendus.academie-sciences.fr/biologies/articles/10.1016/j.crvi.2004.08.010/

Original version of the full text

1 Introduction

Usually, wastewater originated from urban areas or industry undergoes a physical/chemical/biological treatment in a purifying plant. From there, wastewater is discharged through a submarine outfall into an aquatic media like a lake, a river or a coastal area, at a suitable distance from protected areas like beaches, fisheries or marine recreation zones. When several purifying plants are going to discharge wastewater into the same domain, the problem of design and management of the whole treatment system arises. To solve this problem, optimal control theory and optimization methods can be very useful: they can help decision makers in formulating rational policies in order to minimize costs while keeping the prescribed levels of water quality. Sections 4 and 5 are devoted to present two typical examples: the optimal management of a wastewater treatment system and the optimal location of the submarine outfalls.

Obviously, the knowledge of mathematical models for the evolution of pollutant concentration is a unavoidable first step if one wants to use optimal control techniques. So, the first part of this work is devoted to study in detail one of them, related with Biochemical Oxygen Demand (BOD) and Dissolved Oxygen (DO), which is frequently used in the case of domestic discharges. In Section 2 we deal with the complete two-dimensional model consisting of two uncoupled system of partial differential equations which give us the height of water, the depth-averaged horizontal velocity of water and the depth-averaged concentration of BOD and DO. In Section 3 we obtain a new zero-dimensional model, by integrating the previous one, which can be very useful to study the global performance of the system. We apply this model in the ría of Arousa (Spain) to obtain the global concentration of BOD and DO along the time.

2 A complete two-dimensional model for Biochemical Oxygen Demand and Dissolved Oxygen

We consider a domain Ω occupied by shallow water (as can be a ría or an estuary), where polluting wastewater are discharged through NE submarine outfalls located at points bjΩ and connected to their respective purifying plants located at points ajΓ (see Fig. 1). Moreover, we assume the existence of several areas AiΩ,i=1,,NZ, representing fisheries, beaches or marine recreation zones where it is necessary to guarantee the water quality with pollution levels lower than some allowed threshold levels.

Fig. 1

Domain Ω.

The flow of an effluent from a submarine outfall in a shallow water domain is mainly governed by horizontal transport due to currents (produced by tides, wind …) and turbulent diffusion. It allows uncouple hydrodynamical equations and transport equations. The former give the height and the velocity field which are used in latter to obtain the pollution levels.

2.1 Hydrodynamic model: the shallow water equations

In this section we recall the shallow water equations which constitute an useful mathematical model for hydrodynamic flows in shallow regions. If we consider Γ, the boundary of Ω, divided into three parts: Γ (corresponding to the effluent), Γ+ (corresponding to open sea) and Γ0 (corresponding to the cost), then the shallow water equations can be written in the following way:

ht+(hu)=0in Ω×(0,T)ut+(u)uνΔu+gh=FinΩ×(0,T)h=ηonΓ×(0,T)h=ϕonΓ+×(0,T)h(0)=h0inΩun=qonΓ×(0,T)un=0onΓ0×(0,T)u=0onΓ+×(0,T)u(0)=u0inΩ}(1)
where h(x,t) and u(x,t) denote, respectively, the height of water and the depth-averaged horizontal velocity of water, η, ϕ, h0, q and u0 are given functions, ν (kinetic eddy viscosity coefficient) and g (gravity acceleration) are physical parameters experimentally known, n denotes the unit outer normal vector to boundary Γ and the second member F collects all the effects of atmospheric pressure, wind stress, bottom friction and so on.

There are several works related to the existence, uniqueness and regularity of solution of (1) in particular cases (see, for instance, [1–5]) but in the general case it is still an open problem. A numerical approximation of h and u in Ω×(0,T) can be obtained by finite difference, finite element or finite volume methods (see, for instance, [6–9]) in order to be employed in the pollutant dispersion model.

2.2 Pollutant dispersion: the BOD-DO model

Firstly, in order to simulate the water quality in Ω, we have to choose some indicators of pollution levels. Two of the most important (especially in the case of domestic discharges) are the Dissolved Oxygen (DO) and the organic matter, which can be measured in terms of the need of oxygen to decompose it, the so-called Biochemical Oxygen Demand (BOD). If the pollution level is not too high the BOD can be satisfied by the DO. However, if the organic matter increases beyond a maximum value the DO is not enough for its decomposition, leading to important modifications (anaerobic processes) in the ecosystem. To avoid them a threshold value of BOD may not be exceeded and a minimum level of DO must be guaranteed.

The evolution of the BOD and the DO in the domain ΩR2 is governed by a system of partial differential equations (cf. [10]). Let us denote by ρ1(x,t) and ρ2(x,t) the concentrations of BOD and DO at point xΩ and at time t[0,T], respectively. Then these concentrations are obtained as the solution of the following two initial-boundary value problems:

ρ1t+uρ1β1Δρ1=κ1ρ1+1hj=1NEmjδ(xbj)inΩ×(0,T)ρ1n=0onΓ×(0,T)ρ1(x,0)=ρ10(x)inΩρ2t+uρ2β2Δρ2=κ1ρ1+1hκ2(dsρ2)inΩ×(0,T)ρ2n=0onΓ×(0,T)ρ2(x,0)=ρ20(x)inΩ}(2)
where u and h are given by (1), mj(t) is the mass flow rate of BOD discharged at point bj, δ(xbj) denotes the Dirac measure located at bj and positive parameters β1 and β2 (horizontal viscosity coefficients), κ1, κ2 (kinetic coefficients related to BOD elimination and oxygen transfer through the surface, respectively) and ds (oxygen saturation density) can be obtained from experimental measurements.

For this system we can prove the existence and uniqueness of solution (cf. [11]). A numerical solution for (2) can be obtained by a method which combines characteristics for time discretization with finite elements for space discretization (cf. [12]).

3 The global performance: a zero-dimensional model

The main aim in this paper is to study the global performance of the BOD-DO model in a ría, an estuary or a lake. In order to do it we integrate the system (2) in the region occupied by water. Thus, we obtain a new simple zero-dimensional model.

Let M1(t) and M2(t) be, respectively, the total mass of BOD and DO in the region at time t, that is to say,

M1(t)=Ωh(x,t)ρ1(x,t)dx
M2(t)=Ωh(x,t)ρ2(x,t)dx
Then, by integrating in Ω Eq. (2) in their conservative form and applying the Green's formula, we obtain
{dM1dt=κ1M1+Q+F1dM2dt=κ1M1+Aκ2(dsM2V)+F2(3)
where A is the area of water surface in contact with air, V is the whole water volume, Q denotes the mass flow rate of BOD discharged in the region (that is, Q=j=1NEmj), and F1 and F2 are, respectively, the mass flow rate of BOD and DO across the boundary (Fi=Γhρiundσ, for i=1,2).

If we study a stationary region (as can be a closed lake) A and V are constant along the time. In this case, if we also suppose that Q, F1 and F2 are constant, the exact solution of (3) is given by:

(4)
where a=κ2AV and b=κ2dsA+F2.

In order to develop an asymptotic study, for t1κ1 and t1a, the terms with eκ1t and eat can be negligible in (4) and the asymptotic values of BOD and DO are M1()=(Q+F1)κ1 and M2()=(bQF1)a. However, it is as well to point out that, in a shallow water domain, the typical values of κ1 and a are, respectively, of the order of 10−5 and 10−13 s−1, and then, the previous asymptotic values would be reached 300,000 years later!

For 1κ1t1a (only about some days later), we can neglect eκ1t and approximate eat1at. Then we obtain an asymptotic value for the BOD and a linear approximation for the DO:

M1(t)Q+F1κ1
M2(t)(M2(0)+Q+F1κ1M1(0)κ1a)+(bQF1a(M2(0)+Q+F1κ1M1(0)κ1a))t

When we are working in an open region (as can be a ría or an estuary), we must take into account the water renewal. For example, in a ría, we can assume that inflow water is more pure than outflow water (in the sense that DO concentration is greater and BOD concentration is lesser) and, moreover, we know that DO concentration in inflow water is always lesser than oxygen saturation density (ds). In this case, if ϕ(t) denotes the height over a fixed level (half tide) at the mouth of the ría and V˜ denotes the water volume corresponding to half tide, then, by geometrical reasons, we have

V(t)=Aϕ(t)+V˜

Moreover, taking into account the purification of the water in the ría because of the seawater renewal, we obtain the following expressions for the mass flow rates across the boundary:

F1(t)=ϕ(t)AαM1(t)V(t)
F2(t)=ϕ(t)AC(t)
where C(t)=min{βM2(t)V(t),ds}, and α and β are two experimental parameters verifying α=β=1 if ϕ(t)<0, α<1<β if ϕ(t)>0. According to this, the system (3) is rewritten as follows:
{dM1(t)dt=κ1M1(t)+Q+ϕ(t)AαM1(t)V(t)dM2(t)dt=κ1M1(t)+Aκ2(dsM2(t)V(t))+ϕ(t)AC(t)(5)

This system can be easily solved by finite difference methods. We have used the backward Euler scheme to solve it for data corresponding to the ría of Arousa (Spain). Moreover, in order to study the weight of the water renewal in the ría, we have compared the result with the exact solution of (3) with V(t)=V and F1=F2=0 (in this case the exact solution is given by (4)). As one can see in Figs. 2 and 3, for data given in Table 1, the BOD concentration reaches an asymptotic value in both cases, but the DO concentration observes a linear decrease without water renewal and reaches an asymptotic value (very close to saturation) when the water renewal is considered.

Fig. 2

BOD concentration in the ría of Arousa (Spain) along the time.

Fig. 3

DO concentration in the ría of Arousa (Spain) along the time.

Table 1

Data for models (3) and (5) corresponding to the ría of Arousa (Spain)

– Total time T=4⋅106 s
– Initial mass of BOD M 1 ( 0 ) = 0   kg
– Initial mass of DO M 2 ( 0 ) = 1.16311 10 7   kg
– Mass flow rate of BOD discharged in the region Q = 0.256   kg s −1
– Oxygen saturation density d s = 8.98 10 −3   kg m −3
– Kinetic coefficients κ1 and κ2 κ 1 = 1.15 10 −5   s −1
κ 2 = 9 10 −12   m s −1
– Area of water surface in contact with air A = 6.77399 10 7   m 2
– Water volume corresponding to half tide V = 1.43897 10 9   m 3
Exclusive data for model (5)
– Height over a fixed level at the mouth of the ría ϕ ( t ) = 1.4 ( sin ( 8 π t 178560 π ) + 1 )
– Parameters α and β if ϕ(t)<0 α=1, β=1
– Parameters α and β if ϕ(t)>0 α=0.95, β=1.02

4 Problem 1: Optimal management of a wastewater treatment system

In this section we pose an optimal control problem related to the management of a wastewater treatment system. We recall the situation is Section 2: we consider a domain occupied by shallow water where polluting wastewater is discharged through NE submarine outfalls (in this section we suppose that these outfalls are located at fixed points bjΩ). Moreover, there exist several sensitive areas, AiΩ, in the domain, where it is necessary to guarantee the water quality with pollution levels lower than an allowed threshold. We suppose that wastewater arrives to the purifying plants with a certain BOD concentration. Before discharging it into the sea, its BOD concentration can be reduced in the plants by different biological or biochemical treatments. From the ecological point of view the depuration in each plant must be as high as possible but, from the economical point of view, there is a cost proportional to the developed depuration. Then, the optimal management problem is determining the depuration at each plant along the time, in such a way that the global depuration cost is minimized and the above constraints on the water quality are satisfied.

4.1 Mathematical formulation

In order to formulate this problem we need to take into account some issues. Firstly, if m¯j denotes the BOD of wastewater arriving to the jth plant and m̲j is the BOD corresponding to the maximum depuration at that plant, then determining the depuration at the jth plant is equivalent to finding the mass flow rate of BOD, mj(t), discharged through the corresponding outfall. We assume that they satisfy the constraints

m̲mj(t)m¯,j=1,2,,NE(6)
Secondly, if we take BOD and DO as indicators of the water quality, then the environmental constraints on it can be written as follows (see Section 2):
{ρ1|Aiσi=1,,NZρ2|Aiζi=1,,NZ(7)
where σ and ζ are, respectively, critical levels for BOD and DO.

Finally, we suppose that the cost of the depuration process at the jth plant is known and it is a strictly convex C2-function of the BOD discharged through the corresponding outfall. Hence, if fj denotes the cost function at jth plant, the cost of the whole depuration is given by,

J1(m)=j=1NE0Tfj(mj(t))dt(8)
According to this, the optimal management problem (P1) consists of finding the functions mj(t), j=1,,NE, minimizing the cost function (8) in such a way that the corresponding state of the system given by (2) satisfies the constraints (6) and (7).

This is an optimal control problem with pointwise state constraints and with pointwise control. We can obtain the existence and uniqueness of solution and an optimality system in order to characterize it (see [11] for further details).

4.2 Numerical resolution

The numerical solution of the optimal control problem (P1) requires a discretization of the state system (2). Moreover, in practice, because of the particular shape of the functions fj, the constraints mj(t)m¯ can be suppressed. Thus, we are led to consider the discretized constraints:

g1:mg1(m)=(ρ1σ,ζρ2)
g2:mg2(m)=m̲m

Then, the optimal control problem (P1) can be written as follows,

(P1D){minJ1(m)such that gi(m)0,i=1,2
Now this problem can be solved by different numerical methods (we refer to [13] for a numerical resolution of (P1D) by using a sequential quadratic programming algorithm and an admissible points method).

4.3 Numerical results

In this work we resolve this problem in a realistic situation posed in the ría of A Coruña (Spain). We consider one purifying plant and one protected area (see Fig. 4). We assume pollutant concentration of the wastewater arriving to the purifying plant is 150 kgm−3 (then the depuration cost above this value is constant and equal to 100) and we suppose that the complete depuration is not possible. Thus, we take the following cost function

f1(x)={100×1503x33×150x2+3×1502xifx150100ifx150
We fix a maximum value for BOD (σ1=5.241610−4 kgm−3) and a minimum value for DO (ζ1=8.0389110−3 kgm−3) in the protected area and we resolve the problem (P1) in order to find the optimal discharge during a complete tidal cycle (T=12.4 h). The result can be seen in Fig. 5. We observe that the worst moment to discharge is low tide (t=0); from this moment, the depuration can be less and less strong until after hide tide when the BOD discharge must be again to decrease (for this discharge, the fulfillment of the BOD constraints in the protected area at the last point of time can be seen in Fig. 4).

Fig. 4

BOD concentration at the end of the tidal cycle, for the discharge in Fig. 5 (ría of A Coruña).

Fig. 5

Optimal discharge during a complete tidal cycle (ría of A Coruña).

In order to make sure that the previous interpretation is correct we have found the optimal discharge during several tidal cycles. In Fig. 6, we show the optimal discharge during three cycles. In effect, we observe some periodicity, however, because of BOD accumulation, the discharge is greater in the next cycle than in the previous one. The DO concentration at the last point of time, when the saturation of the constraints takes place, can be seen in Fig. 7.

Fig. 6

Optimal discharge during three tidal cycles (ría of A Coruña).

Fig. 7

DO concentration at the end of the three cycles, for the discharge in Fig. 6 (ría of A Coruña).

5 Problem 2: Optimal location of wastewater outfalls

The second problem is connected with the optimal design of a wastewater treatment system. Particularly, it consists of finding the optimal location of the submarine outfalls.

We consider a similar situation to the previous one: a domain occupied by shallow water where we are going to discharge polluting wastewater through submarine outfalls and where there exist several sensitive areas in which we have to guarantee the water quality in terms of BOD and DO. Moreover, we also suppose that there are NE purifying plants (located at points ajΓ) but, unlike the previous problem, we now assume that the depuration in every plant is fixed (the functions mj(t) are known beforehand) and our goal is to determine the points bj where wastewater will be discharged. These points must be determined in order to minimize the construction cost of the submarine outfalls while guaranteeing the water quality at the protected areas.

5.1 Mathematical formulation

The constraints on the water quality are given in (7). Moreover, taking into account technological limitations, the jth outfall must be placed in a suitable region Uj, where UjΩ\i=1NZA¯i is a compact convex polyhedral set representing all the admissible points where outfalls can be located. Thus, the optimal locations must verify bjUj,j=1,,NE. If we define Uad=j=1NEUj, this constraint can be written in the simpler way

bUad(9)
Finally, we suppose that the construction cost of the jth outfall depends on the distance between the purifying plant (located at point aj) and the point of discharge, bjΩ. Hence we consider that the global cost of the system is given by
J2(b)=j=1NE12bjaj2(10)
Then the problem of optimal design, denoted by (P2), consists of finding the points bj, j=1,,NE minimizing the cost function (10) under the constraints (7) and (9).

This is a control problem with quadratic cost but with nonconvex pointwise state constraints which makes difficult its analysis and resolution. A complete theoretical analysis of this problem can be seen in [14].

5.2 Numerical resolution

Now, in order to solve the problem (P2), we introduce a discretization of the control problem in the same way that the previous problem. Firstly, the function collecting the discretized state constraints is denoted by g¯1,

g¯1:bg¯1(b)=(ρ1σ,ζρ2)
Secondly, we define a function g¯2 collecting all the linear constraints on the control which corresponds to the characterization of Uad, i.e., g¯2 is such that bUadg¯2(b)0.

Then the optimal control problem (P2) is approximated by the following discrete optimization problem,

(P2D){minJ2(b)such that g¯i(b)0,i=1,2

In [15], three different algorithms are used to obtain the numerical solution of (P2D) namely an admissible points algorithm, the Nelder–Mead simplex method and a duality method. As we can see in that paper, due to the geometric nature of the problem, the three algorithms present a good performance, specially the Nelder–Mead method.

5.3 Numerical results

In this section we present the numerical results obtained when solving the problem (P2) for a realistic situation posed in the ría of Vigo (Spain) during a complete tidal cycle. We have taken two purifying plants, located near the coast at points a1=(0,11000) and a2=(6630,7200), and two protected areas (see Fig. 8).

Fig. 8

Optimal BOD concentration (hight tide, ría of Vigo).

The state constraints for both protected areas corresponds to σ1=0.0002, σ2=0.000135, ζ1=0.008067, ζ2=0.0000805. The admissible set Uad and the optimal locations b1=(69,10224) and b2=(5535,8278), given by the Nelder–Mead method can be seen in Fig. 8. Moreover, this figure shows the BOD concentration at high tide, at the end of the tidal cycle that we have simulated.

6 Conclusions

In this work, mathematical modelling and optimal control theory have been successfully applied to an interesting ecological problem: the management and design of a wastewater treatment system for coastal areas. In the last sections of the paper we present numerical results for two different cases related to this ecological problem.

However, the main contribution of this paper is the obtaining of a zero-dimensional model, which can be used in the study of the global performance of the system; we present an application of this simple model in a realistic situation posed in the ría of Arousa (Spain).

Obtained results indicate the good performance of our models and show how mathematical tools can be very useful in the study of a wide range of ecological problems.

Acknowledgments

This work was supported by Project BFM2003-00373 of Ministerio de Ciencia y Tecnología (Spain).


References

[1] B.A. Ton Existence and uniqueness of a classical solution of an initial-boundary value problem of the theory of shallow waters, SIAM J. Math. Anal., Volume 12 (1981), pp. 229-241

[2] P.E. Kloeden Global existence of classical solutions in the dissipative shallow water equations, SIAM J. Math. Anal., Volume 16 (1985), pp. 301-315

[3] P. Orenga A theorem on the existence of solutions of a shallow-water problem, Arch. Rational Mech. Anal., Volume 130 (1995), pp. 183-204

[4] F.J. Chatelon; P. Orenga On a non-homogeneous shallow-water problem, RAIRO Model. Math. Anal. Numer., Volume 31 (1997), pp. 27-55

[5] L. Sundbye Global existence for the Cauchy problem for the viscous shallow water equations, Rocky Mountain J. Math., Volume 28 (1998), pp. 1135-1152

[6] A. Bermúdez; C. Rodríguez; M.A. Vilar Solving shallow water equations by a mixed implicit finite element method, IMA J. Numer. Anal., Volume 11 (1991), pp. 79-97

[7] C. Bernardi; O. Pironneau On the shallow water equations at low Reynolds number, Comm. Partial Differential Equations, Volume 16 (1991), pp. 59-104

[8] V.I. Agoshkov; D. Ambrosi; V. Pennati; A. Quarteroni; F. Saleri Mathematical and numerical modelling of shallow water flow, Comput. Mech., Volume 11 (1993), pp. 280-299

[9] S. Chippada; C.N. Dawson; M.L. Martinez; M.F. Wheeler Finite element approximations to the system of shallow water equations I. Continuous-time a priori error estimates, SIAM J. Numer. Anal., Volume 35 (1998), pp. 692-711

[10] A. Bermúdez Mathematical techniques for some environmental problems related to water (J.I. Díaz; J.L. Lions, eds.), Mathematics, Climate and Environmental, Masson, Paris, 1993

[11] A. Martínez; C. Rodríguez; M.E. Vázquez-Méndez Theoretical and numerical analysis of an optimal control problem related to wastewater treatment, SIAM J. Control Optim., Volume 38 (2000), pp. 1534-1553

[12] L.J. Alvarez-Vázquez; A. Martínez; C. Rodríguez; M.E. Vázquez-Méndez A wastewater treatment problem: study of the numerical convergence, J. Comput. Appl. Math., Volume 140 (2002), pp. 27-39

[13] A. Martínez; C. Rodríguez; M.E. Vázquez-Méndez A control problem arising in the process of waste water purification, J. Comput. Appl. Math., Volume 114 (2000), pp. 67-79

[14] L.J. Alvarez-Vázquez; A. Martínez; C. Rodríguez; M.E. Vázquez-Méndez Mathematical Analysis of the optimal location of wastewater outfalls, IMA J. Appl. Math., Volume 67 (2002), pp. 23-39

[15] L.J. Alvarez-Vázquez; A. Martínez; C. Rodríguez; M.E. Vázquez-Méndez Numerical optimization for the location of wastewater outfalls, Comput. Optim. Appl., Volume 22 (2002), pp. 399-417


Comments - Policy