Comptes Rendus
no. 12
Passive vibration absorber effect on the machining surface quality of a flexible workpiece
Riadh Chaari1  ; Marwa Haddar1 ; Fathi Djemal1 ; Fakher Chaari1 ; Mohamed Haddar1
1 Mechanics, Modelling and Manufacturing Laboratory (LA2MP), Mechanical Engineering Department, National School of Engineers of Sfax, University of Sfax, Tunisia
Comptes Rendus. Mécanique, Volume 347 (2019) no. 12, pp. 903-911.

This paper presents a study of the vibratory behaviour of a flexible workpiece subject to a milling end operation. Indeed, this vibratory behaviour is critical, especially when the excitation frequency is near to the resonance. For this reason, passive vibration suppression is considered in order to attenuate the dynamic response of the milled workpiece and decrease the dynamic effect on the resulting machined surface roughness and flatness. In order to confirm the efficiency of the passive vibration suppression, the vibratory behaviour and the quality (roughness and flatness) of a machined surface are studied without and with passive absorber (TMD) using a finite-element model.

Reçu le :
Accepté le :
Publié le :
DOI : 10.1016/j.crme.2019.11.014
Mots clés : Passive absorber, Vibration, Milling, Flatness
Riadh Chaari 1 ; Marwa Haddar 1 ; Fathi Djemal 1 ; Fakher Chaari 1 ; Mohamed Haddar 1

1 Mechanics, Modelling and Manufacturing Laboratory (LA2MP), Mechanical Engineering Department, National School of Engineers of Sfax, University of Sfax, Tunisia 
@article{CRMECA_2019__347_12_903_0,
     author = {Riadh Chaari and Marwa Haddar and Fathi Djemal and Fakher Chaari and Mohamed Haddar},
     title = {Passive vibration absorber effect on the machining surface quality of a flexible workpiece},
     journal = {Comptes Rendus. M\'ecanique},
     pages = {903--911},
     publisher = {Elsevier},
     volume = {347},
     number = {12},
     year = {2019},
     doi = {10.1016/j.crme.2019.11.014},
     language = {en},
}
TY  - JOUR
AU  - Riadh Chaari
AU  - Marwa Haddar
AU  - Fathi Djemal
AU  - Fakher Chaari
AU  - Mohamed Haddar
TI  - Passive vibration absorber effect on the machining surface quality of a flexible workpiece
JO  - Comptes Rendus. Mécanique
PY  - 2019
SP  - 903
EP  - 911
VL  - 347
IS  - 12
PB  - Elsevier
DO  - 10.1016/j.crme.2019.11.014
LA  - en
ID  - CRMECA_2019__347_12_903_0
ER  - 
%0 Journal Article
%A Riadh Chaari
%A Marwa Haddar
%A Fathi Djemal
%A Fakher Chaari
%A Mohamed Haddar
%T Passive vibration absorber effect on the machining surface quality of a flexible workpiece
%J Comptes Rendus. Mécanique
%D 2019
%P 903-911
%V 347
%N 12
%I Elsevier
%R 10.1016/j.crme.2019.11.014
%G en
%F CRMECA_2019__347_12_903_0
Riadh Chaari; Marwa Haddar; Fathi Djemal; Fakher Chaari; Mohamed Haddar. Passive vibration absorber effect on the machining surface quality of a flexible workpiece. Comptes Rendus. Mécanique, Volume 347 (2019) no. 12, pp. 903-911. doi : 10.1016/j.crme.2019.11.014. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.1016/j.crme.2019.11.014/

[1] J.W. Sutherland; R.E. DeVor An improved method for cutting force and surface error prediction in flexible end milling systems, J. Eng. Ind., Volume 108 (1986) no. 4, pp. 269-279

[2] D. Montgomery; Y. Altintaş Mechanism of cutting force and surface generation in dynamic milling, J. Eng. Ind., Volume 113 (1991) no. 2, pp. 160-168 | DOI

[3] Y. Altintaş; E. Budak Analytical prediction of stability lobes in milling, CIRP Ann., Volume 44 (1995) no. 1, pp. 357-362 | DOI

[4] Y. Altintaş; J.H. Ko Chatter stability of plunge milling, CIRP Ann., Volume 55 (2006) no. 1, pp. 361-364 | DOI

[5] S.S. Bhogal; C. Sindhu; S.S. Dhami; B.S. Pabla Minimization of surface roughness and tool vibration in CNC milling operation, J. Optim., Volume 2015 (2015), pp. 1-13 | DOI

[6] S. Sheth; P. George Experimental investigation and optimization of flatness and roughness using grey relational analysis for WCB material during face milling operation, Proc. Technol., Volume 23 (2016), pp. 344-351

[7] K. Simunovic; G. Simunovic; T. Saric Predicting the surface quality of face milled Aluminium Alloy using a multiple regression model and numerical optimization, J. Inst. Meas. Sci. Slovak Acad. Sci., Volume 13 (2013) no. 5, pp. 265-272

[8] R. Chaari; M. AbdelNadher; J. Louati; M. Haddar Modeling of the 3D geometric defaults accounting for workpiece vibratory behavior, Int. J. Simul. Model., Volume 10 (2011) no. 2, pp. 66-77 | DOI

[9] N.D. Sims Vibration absorbers for chatter suppression: a new analytical tuning methodology, J. Sound Vib., Volume 301 (2007), pp. 592-607 | DOI

[10] M. Wang Feasibility study of nonlinear tuned mass damper for machining chatter suppression, J. Sound Vib., Volume 330 (2011), pp. 1917-1930 | DOI

[11] M. Hamed; V. Gholamreza; R.M. Mohammad; S. Hassan Suppression of nonlinear regenerative chatter in milling process via robust optimal control, J. Process Control, Volume 23 (2013), pp. 631-648 | DOI

[12] M. Hamed; R.M. Mohammad; V. Gholamreza Tunable vibration absorber for improving milling stability with tool wear and process damping effects, Mech. Mach. Theory, Volume 52 (2012), pp. 59-77 | DOI

[13] M. Hamed; V. Gholamreza; R.M. Mohammad; T.A. Mohammad Forced vibration analysis of the milling process with structural nonlinearity, internal resonance, tool wear and process damping effects, Int. J. Non-Linear Mech., Volume 54 (2013), pp. 22-34 | DOI

[14] W. Gafsi; R. Chaari; N. Masmoudi; M.T. Khabou; F. Chaari; M. Haddar Modeling of a passive absorber in milling tool machine, Appl. Acoust., Volume 128 (2017), pp. 94-110 | DOI

[15] B. Sathishkumar; K.M. Mohanasundaram; M. Senthil Kumar Impact of particle damping parameters on surface roughness of bored surface, Arab. J. Sci. Eng., Volume 39 (2014), pp. 7327-7334 https://link.springer.com/article/10.1007/s13369-014-1209-1

[16] D.-h. Tang; F. Lu A cutting force model for face milling operation, Adv. Mater. Res., Volume 765–767 (2013), pp. 378-381 | DOI

[17] W. Zhong; S.J. Hui Modelling machining geometric variation in N-2-1 fixturing scheme, J. Manuf. Sci. Eng., Volume 128 (2006), pp. 213-219

[18] W. Zhong; Y. Huang; S.J. Hu Modelling variation propagation for machining systems with different configurations, Proceedings of ASME IMECE, MED, New Orleans, ASME, New York, vol. 13, 2002, pp. 97-106

Cité par Sources :

Commentaires - Politique

Ces articles pourraient vous intéresser

Some insights on the modelling of chip formation and its morphology during metal cutting operations

Tarek Mabrouki; Cédric Courbon; Yancheng Zhang; ...

C. R. Méca (2016)

3D numerical simulation of drilling residual stresses

Mathieu Girinon; Frédéric Valiorgue; Habib Karaouni; ...

C. R. Méca (2018)

Energy consumed by a bearing supported spindle in the presence of a dynamic cutting force and of defects

Anoire Ben Jdidia; Taissir Hentati; Alain Bellacicco; ...

C. R. Méca (2019)