[Simulations des grandes échelles d'un jet plan en impact proche]
Large Eddy Simulations of a plane turbulent impinging jet have been carried out using the dynamic Smagorinsky model. The statistical results are first validated with the measurements from the literature: mean and turbulent quantities along the jet axis and at different vertical locations are presented. This study is completed by the analysis of the wall shear stress at the impingement wall. The effect of the jet Reynolds number (3000⩽Re⩽13500) on the kinematic development of the jet is also discussed.
Une étude par simulations des grandes échelles turbulentes a été menée sur un jet plan turbulent en impact proche. Les résultats statistiques sont, dans un premier temps, validés par rapport aux mesures de la littérature : les grandeurs moyennes et turbulentes le long de l'axe du jet et à différentes positions verticales sont présentées. Cette étude est complétée par une analyse de la contrainte de cisaillement pariétal. Enfin, l'effet du nombre de Reynolds du jet sur le développement cinématique du jet est également discuté.
Révisé le :
Publié le :
Mots-clés : turbulence, simulation des grandes échelles turbulentes, jet plan en impact
François Beaubert 1 ; Stéphane Viazzo 1
@article{CRMECA_2002__330_12_803_0, author = {Fran\c{c}ois Beaubert and St\'ephane Viazzo}, title = {Large {Eddy} {Simulation} of a plane impinging jet}, journal = {Comptes Rendus. M\'ecanique}, pages = {803--810}, publisher = {Elsevier}, volume = {330}, number = {12}, year = {2002}, doi = {10.1016/S1631-0721(02)01537-1}, language = {en}, }
François Beaubert; Stéphane Viazzo. Large Eddy Simulation of a plane impinging jet. Comptes Rendus. Mécanique, Volume 330 (2002) no. 12, pp. 803-810. doi : 10.1016/S1631-0721(02)01537-1. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.1016/S1631-0721(02)01537-1/
[1] On the vortical structure in a plane impinging jet, J. Fluid Mech., Volume 434 (2001), pp. 273-300
[2] Impinging jet studies for turbulence model assessment. An examination of the performance of four turbulence models, Int. J. Heat Mass Transfer, Volume 36 (1993), pp. 2685-2697
[3] Large eddy simulation of plane turbulent jet flow using a new outflow velocity boundary condition, JSME Int. J., Volume 37 (1994) no. 2, pp. 242-253
[4] Large eddy simulation of a plane jet, Phys. Fluids, Volume 11 (1999) no. 10, pp. 3069-3083
[5] Numerical simulation of spatially-developing planar jets, 74th Fluid Dynamics Symposium on Application of Direct and Large Eddy Simulation of Transition and Turbulence, Chania, Crete, Greece, 1994, pp. 1-6
[6] Large-eddy simulations of plane impinging jets, Int. J. Numer. Methods Engrg., Volume 38 (1995), pp. 489-507
[7] Large-eddy simulation of flow and heat transfer in an impinging slot jet, Int. J. Heat Fluid Flow, Volume 22 (2001), pp. 500-508
[8] A dynamic subgrid-scale eddy viscosity model, Phys. Fluids A, Volume 3 (1991) no. 7, pp. 1760-1765
[9] A proposed modification of the Germano subgrid-scale closure method, Phys. Fluids, Volume 4 (1992) no. 3, pp. 633-635
[10] Study of discrete test filters and finite difference approximations for the dynamic subgrid-scale stress model, Phys. Fluids, Volume 8 (1996) no. 4, pp. 1076-1088
[11] A Hermitian–Fourier numerical method for solving the incompressible Navier–Stokes equations, Computers & Fluids, Volume 24 (1995), pp. 739-752
[12] The plane air jet impinging nearby and far from flate plate, Exp. Fluids, Volume 31 (2001) no. 6, pp. 687-697
[13] Large eddy simulations of plane turbulent impinging jets, 14th Australasian Fluid Mechanics Conference, Adelaide University Australia, 2001, pp. 425-428
[14] Velocity measurements in a plane turbulent air jet at moderate Reynolds numbers, Exp. Fluids, Volume 6 (1988), pp. 387-399
[15] Interaction region of a two-dimensional turbulent plane jet in still air (R. Dumas; L. Fulachier, eds.), Structure of Complex Turbulent Shear Flow, 1983
[16] C.V. Tu, Impingement of Plane Turbulent Jets and their Application in Industrial Coating Control, Ph.D. thesis, Univ. Newcastle, Callaghan, NSW, Australia, 1995
[17] Wall pressure and shear stress measurements beneath an impinging jet, Experimental Thermal and Fluid Science, Volume 13 (1996), pp. 364-373
[18] F. Beaubert, S. Viazzo, Large eddy simulations of plane turbulent impinging jets at moderate reynolds numbers, in: 5th International Symposium on Engineering Turbulence Modeling and Measurements, Mallorca, Spain, 2002
- Interaction of a droplet spray with a turbulent plane air jet impacting a wall, Experiments in Fluids, Volume 64 (2023) no. 3 | DOI:10.1007/s00348-023-03585-z
- Experimental and numerical modeling of an air jet impingement system, European Journal of Mechanics - B/Fluids, Volume 94 (2022), p. 228 | DOI:10.1016/j.euromechflu.2022.03.005
- Computational analysis of convective heat transfer properties of turbulent slot jet impingement, Engineering Computations, Volume 38 (2021) no. 10, p. 3785 | DOI:10.1108/ec-08-2020-0483
- A comparative turbulent flow study of unconfined orthogonal and oblique slot impinging jet using large-eddy simulation, Physics of Fluids, Volume 32 (2020) no. 9 | DOI:10.1063/5.0021426
- , 1ST INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND NANOTECHNOLOGY (ICAMEN 2019), Volume 2148 (2019), p. 020001 | DOI:10.1063/1.5123922
- Conjugate Heat Transfer and Fluid Flow Modeling for Liquid Microjet Impingement Cooling with Alternating Feeding and Draining Channels, Fluids, Volume 4 (2019) no. 3, p. 145 | DOI:10.3390/fluids4030145
- OpenFOAM based LES of slot jet impingement heat transfer at low nozzle to plate spacing using four SGS models, Heat and Mass Transfer, Volume 55 (2019) no. 3, p. 911 | DOI:10.1007/s00231-018-2470-8
- Flow and thermal characteristics of jet impingement on a flat plate for small nozzle to plate spacing using LES, International Journal of Thermal Sciences, Volume 145 (2019), p. 106005 | DOI:10.1016/j.ijthermalsci.2019.106005
- Heat transfer in a turbulent jet impinging on a moving plate considering high plate-to-jet velocity ratios, Journal of Mechanical Science and Technology, Volume 28 (2014) no. 11, p. 4509 | DOI:10.1007/s12206-014-1018-1
- LES of a Turbulent Slot Impinging Jet to Predict Fluid Flow and Heat Transfer, Numerical Heat Transfer, Part A: Applications, Volume 64 (2013) no. 10, p. 759 | DOI:10.1080/10407782.2013.798577
- Simulation of plane impinging jets with k–ω based hybrid RANS/LES models, International Journal of Heat and Fluid Flow, Volume 31 (2010) no. 5, p. 862 | DOI:10.1016/j.ijheatfluidflow.2010.04.011
- Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling, Volume 39 (2006), p. 565 | DOI:10.1016/s0065-2717(06)39006-5
- Impingement Heat Transfer: Correlations and Numerical Modeling, Journal of Heat Transfer, Volume 127 (2005) no. 5, p. 544 | DOI:10.1115/1.1861921
- , SAE Technical Paper Series, Volume 1 (2005) | DOI:10.4271/2005-01-3171
- , Proceedings of the 5th Electronics Packaging Technology Conference (EPTC 2003) (2003), p. 626 | DOI:10.1109/eptc.2003.1271594
Cité par 15 documents. Sources : Crossref
Commentaires - Politique