Un modèle numérique de simulation des transferts couplés de chaleur, de masse et de quantité de mouvement pendant la solification d'un alliage binaire est présenté. Les équations du modèle sont classiques, l'écoulement du liquide interdendritrique est décrit par une loi de type Darcy. Le modèle des bras de levier (équilibre complet entre les phases liquide et solide) a été adopté pour la microsgégrégation. Le modèle numérique a été élaboré suivant la méthode des éléments finis pour des géométries tri-dimensionnelles dans le code THERCAST. Les équations de conservation de l'énergie et de la masse de soluté ont été discrétisées à l'aide d'un schéma SUPG et celles de la quantité de mouvement et de la masse totale par un schéma SUPG-PSPG. L'originalité de ce travail provient de la mise en oeuvre d'une méthode de maillage évolutif qui permet d'obtenir une bonne précision de calcul avec un nombre d'éléments de calcul raisonnable. Deux applications illustratives sont présentées, une première application concerne le cas d'un petit domaine pour un alliage Pb- et la deuxième, un lingot d'acier.
The article presents a three-dimensional coupled numerical solution of momentum, mass, energy and solute conservation equations, for binary alloy solidification. The interdendritic flow in the mushy zone is assumed to obey the Darcy's law. Microsegregation is governed by the lever rule, assuming local equilibrium at phase interfaces. The resulting energy and solute advection–diffusion equations are solved using the Streamline-Upwind/Petrov–Galerkin (SUPG) finite element method. A SUPG-PSPG velocity-pressure formulation is applied for the momentum equation. The full algorithm was implemented in the 3D code THERCAST, together with an anisotropic remeshing method. Two applications have been considered: a small ingot of Pb-48wt%Sn alloy and a large steel ingot. The numerical results of these two cases are presented with the evolution of temperature, liquid velocity, and solute concentration fields during solidification.
Mot clés : Mécanique des fluides numérique, Solidification, Macroségrégation, Eléments finis, Remaillage
Sylvain Gouttebroze 1 ; Michel Bellet 1 ; Hervé Combeau 2
@article{CRMECA_2007__335_5-6_269_0, author = {Sylvain Gouttebroze and Michel Bellet and Herv\'e Combeau}, title = {3D macrosegregation simulation with anisotropic remeshing}, journal = {Comptes Rendus. M\'ecanique}, pages = {269--279}, publisher = {Elsevier}, volume = {335}, number = {5-6}, year = {2007}, doi = {10.1016/j.crme.2007.05.005}, language = {en}, }
TY - JOUR AU - Sylvain Gouttebroze AU - Michel Bellet AU - Hervé Combeau TI - 3D macrosegregation simulation with anisotropic remeshing JO - Comptes Rendus. Mécanique PY - 2007 SP - 269 EP - 279 VL - 335 IS - 5-6 PB - Elsevier DO - 10.1016/j.crme.2007.05.005 LA - en ID - CRMECA_2007__335_5-6_269_0 ER -
Sylvain Gouttebroze; Michel Bellet; Hervé Combeau. 3D macrosegregation simulation with anisotropic remeshing. Comptes Rendus. Mécanique, Volume 335 (2007) no. 5-6, pp. 269-279. doi : 10.1016/j.crme.2007.05.005. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.1016/j.crme.2007.05.005/
[1] J.-L. Desbiolles, Ph. Thevoz, M. Rappaz, Micro-/macrosegregation modeling in casting: a fully coupled 3D model, in: Proceedings of Modeling of Casting, Welding and Advanced Solidification Processes X, TMS, 2003, pp. 245–252
[2] G. Quillet, A. Ciobanas, P. Lehmann, Y. Delannay, M. Medina, Y. Fautrelle, Modelling of the mesosegregations in a binary alloy under the influence of a forced convection, in: Proceedings of Modeling of Casting, Welding and Advanced Solidification Processes X, TMS, 2003, pp. 253–260
[3] O. Jaouen, 1998, Modélisation tridimensionnelle par éléments finis pour l'analyse thermo-mécanique du refroidissement des pièces coulées, PhD Thesis, Ecole des Mines de Paris
[4] A volume-averaged two-phase model for transport phenomena during solidification, Metall. Trans. B, Volume 22 (1991), pp. 349-361
[5] A continuum model for momentum, heat and species transport in binary solid–liquid phase change systems—I. Model formulation, Int. J. Heat Mass Transfer, Volume 30 (1987), pp. 2161-2170
[6] Modelling of the meso-segregations under the influence of forced convection: a statistical phase-averaged approach (P. Ehrard; D. Riley; P.H. Steen, eds.), Interactive Dynamics of Convection and Solidification, Kluwer Academic, Dordrecht/London, 2001, pp. 87-97
[7] The modelling of heat, mass and solute transport in solidification systems, Int. J. Heat Mass Transfer, Volume 32 (1989), pp. 1719-1731
[8] A numerical study of the combined effects of microsegregation, mushy zone permeability, and contraction driven flow on macrosegregation and eutectic formation in binary alloy solidification, Int. J. Heat Mass Transfer, Volume 38 (1995), pp. 3455-3473
[9] S. Gouttebroze, V. Fachinotti, M. Bellet, H. Combeau, 3D-FEM modeling of macrosegregation in solidification of binary alloys, in: Proceedings of Seventh ESAFORM Conference, Trondheim, 2004, pp. 421–424
[10] Finite element stabilization parameters computed from element matrices and vectors, Comput. Methods Appl. Mech. Engrg., Volume 190 (2000), pp. 411-430
[11] Streamline upwind/Petrov–Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier–Stokes equations, Comput. Methods Appl. Mech. Engrg., Volume 32 (1982), pp. 199-259
[12] Parallel meshing and remeshing, Appl. Math. Model., Volume 25 (2000) no. 2, pp. 153-175
[13] Observations of ingot macrosegregation on model systems, Metall. Trans., Volume 5 (1974), pp. 1557-1564
[14] Numerical simulation of macrosegregation: A comparison between finite volume method and finite element method predictions and a confrontation with experiments, Metall. Mater. Trans., Volume 29A (1997), pp. 617-630
Cité par Sources :
Commentaires - Politique