Manufacturing industries perform mechanical surface treatments like shot peening at the end of the manufacturing chain to protect important working parts. This treatment modifies the near surface of the treated part with the introduction of compressive residual stresses due to the repeated impacts of the shot. Then, the treated part exhibits, not only a longer life, but also a better fretting behavior, an improved resistance to corrosion… The objective of the present paper is first to study the relation between the process parameters and the material state (residual stress and plastic variables…) for a complex geometry. Next, a numerical tool is proposed, able to predict this material state in a time frame that is consistent with industrial constraints. The originality of the proposed approach thus consists in the chaining of the different steps. The first step is to choose the process parameters for the shot peening process considering conventional or ultrasonic shot peening and model the shot dynamics for a complex geometry. Once the impact velocity field is known, the objective is to compute the local incompatible plastic deformation field due to the repeated impacts using analytical methods. Then, a finite element model is used to compute the residual and deformation fields in the considered mechanical part. The complete method has been performed on the model of a gear, a mechanical part that is most often shot peened and exhibits a complex geometry.
Accepté le :
Publié le :
Donato Gallitelli 1 ; Vincent Boyer 2 ; Maxime Gelineau 2 ; Yann Colaitis 1 ; Emmanuelle Rouhaud 1 ; Delphine Retraint 1 ; Régis Kubler 3 ; Marc Desvignes 3 ; Laurent Barrallier 3
@article{CRMECA_2016__344_4-5_355_0,
author = {Donato Gallitelli and Vincent Boyer and Maxime Gelineau and Yann Colaitis and Emmanuelle Rouhaud and Delphine Retraint and R\'egis Kubler and Marc Desvignes and Laurent Barrallier},
title = {Simulation of shot peening: {From} process parameters to residual stress fields in a structure},
journal = {Comptes Rendus. M\'ecanique},
pages = {355--374},
publisher = {Elsevier},
volume = {344},
number = {4-5},
year = {2016},
doi = {10.1016/j.crme.2016.02.006},
language = {en},
}
TY - JOUR AU - Donato Gallitelli AU - Vincent Boyer AU - Maxime Gelineau AU - Yann Colaitis AU - Emmanuelle Rouhaud AU - Delphine Retraint AU - Régis Kubler AU - Marc Desvignes AU - Laurent Barrallier TI - Simulation of shot peening: From process parameters to residual stress fields in a structure JO - Comptes Rendus. Mécanique PY - 2016 SP - 355 EP - 374 VL - 344 IS - 4-5 PB - Elsevier DO - 10.1016/j.crme.2016.02.006 LA - en ID - CRMECA_2016__344_4-5_355_0 ER -
%0 Journal Article %A Donato Gallitelli %A Vincent Boyer %A Maxime Gelineau %A Yann Colaitis %A Emmanuelle Rouhaud %A Delphine Retraint %A Régis Kubler %A Marc Desvignes %A Laurent Barrallier %T Simulation of shot peening: From process parameters to residual stress fields in a structure %J Comptes Rendus. Mécanique %D 2016 %P 355-374 %V 344 %N 4-5 %I Elsevier %R 10.1016/j.crme.2016.02.006 %G en %F CRMECA_2016__344_4-5_355_0
Donato Gallitelli; Vincent Boyer; Maxime Gelineau; Yann Colaitis; Emmanuelle Rouhaud; Delphine Retraint; Régis Kubler; Marc Desvignes; Laurent Barrallier. Simulation of shot peening: From process parameters to residual stress fields in a structure. Comptes Rendus. Mécanique, Volume 344 (2016) no. 4-5, pp. 355-374. doi : 10.1016/j.crme.2016.02.006. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.1016/j.crme.2016.02.006/
[1] Fatigue failures are tensile failures, Prod. Eng., Volume 22 (1951), pp. 101-124
[2] FEM and BEM analysis and modeling of residual stresses: a bibliography, Finite Elem. Anal. Des., Volume 37 (2001), pp. 253-262
[3] Modeling of residual stress, shot peening (Jian Lu, ed.), Handbook on Residual Stress, Society of Experimental Mechanics, 2005
[4] Literature review on shot peening simulation, Int J. Comput. Mater. Sci. Surf. Eng., Volume 3 (2010) no. 4, pp. 289-310
[5] Optimization of the fatigue strength of materials due to shot peening: a survey, Int. J. Struct. Chang. Solids, Mech. Appl., Volume 2 (2010), pp. 33-63
[6] The influence of peening conditions on the resulting distribution of residual stress, Chicago, IL, USA (1984)
[7] Genèse des contraintes résiduelles de nitruration: étude expérimentale et modélisation, ENSAM, 1992 (Ph.D. thesis)
[8] Caractérisations métallurgiques et mécaniques de couches nitrurées – relation microstructure–comportement, ENSAM, 1998 (Ph.D. thesis)
[9] Residual stress generation in nitrided ternary Fe-3%Cr −0.345%C alloy: phase transformations induced residual stresses, Acta Mater., Volume 58 (2010), pp. 2666-2676
[10] Numerical simulation and experimental verification of carburizing-quenching process of SCr420H steel helical gear, J. Mater. Process. Technol., Volume 209 (2009), pp. 3587-3609
[11] On the modelling of residual stresses due to surface peening using eigenstrain distributions, J. Strain Anal., Volume 40 (2005), pp. 817-824
[12] Residual stress, part I: measurement techniques, Mater. Sci. Technol., Volume 17 (2001), pp. 355-365
[13] Mechanical surface treatment, shot peening (Jian Lu, ed.), Handbook on Residual Stress, Society of Experimental Mechanics, 2005
[14] A New Approach in Inelastic Analysis of Structures, CADLM, 1990
[15] Numerical and experimental analysis of surface roughness generated by shot peening, Appl. Surf. Sci., Volume 258 (2012), pp. 6831-6840
[16] A combined finite/discrete element simulation of shot peening processes, parts I and II: studies on 2D interaction laws, Eng. Comput., Volume 17 (2000), pp. 593-620
[17] Shot peening simulation using discrete and finite element methods, Adv. Eng. Softw., Volume 41 (2010), pp. 1266-1276
[18] Surface impact analysis in shot peening process, Wear, Volume 302 (2013), pp. 1058-1063
[19] Effect of bead quantity in ultrasonic shot peening: surface analysis and numerical simulations, J. Mater. Process. Technol., Volume 225 (2015), pp. 413-420
[20] A combined DEM–FEM numerical method for shot peening parameter optimisation, Adv. Eng. Softw., Volume 79 (2015), pp. 3-26
[21] Predicting shot peening coverage using multiphase computational fluid dynamics simulations, Powder Technol., Volume 256 (2014), pp. 100-112
[22] Granular gases in mechanical engineering: on the origin of heterogeneous ultrasonic shot peening, Granul. Matter, Volume 9 (2007), pp. 25-33
[23] Simulation of shot dynamics for ultrasonic shot peening: the effects of process parameters, Int. J. Mech. Sci., Volume 82 (2014), pp. 179-190
[24] CAD based model of ultrasonic shot peening for complex industrial parts, Adv. Eng. Softw., Volume 76 (2014), pp. 31-42
[25] Modélisation du grenaillage ultrason pour des pieces à géométrie complexe, 2014 (Thèse de Université de technologie de Troyes)
[26] Shot peening and peen forming finite element modeling – towards a quantitative method, Int. J. Solids Struct., Volume 48 (2011), pp. 2859-2877
[27] On the potential applications of a 3D random finite element model for the simulation of shot peening, Adv. Eng. Softw., Volume 40 (2009), pp. 1023-1038
[28] A 3D FE model for the evaluation of equi-biaxial peening residual stress due to multi-impacts, Surf. Coat. Technol., Volume 206 (2012), pp. 3981-3988
[29] An approach to relate shot peening finite element simulation to the actual coverage, Surf. Coat. Technol., Volume 243 (2014), pp. 39-45
[30] On the shot peening surface coverage and its assessment by means of finite element simulation: a critical review and some original developments, Appl. Surf. Sci., Volume 259 (2012), pp. 186-194
[31] Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (USP), J. Mater. Process. Technol., Volume 212 (2012), pp. 2080-2090
[32] Mécanique expérimentale des fluides, Dunod, Paris, 2003 (tome 2 et 3)
[33] Analyse des contraintes résiduelles générées lors du grenaillage: approches analytique, numérique et expérimentale des impacts de billes, 2007 (Thèse de doctorat de l'Université de technologie de Troyes)
[34] Non-dimensional analysis of shot peening by means of DoE, Int. J. Mater. Prod. Technol., Volume 15 (2000), pp. 131-141
[35] Numerical procedure for shot peening optimization by means of non-dimensional factors, Int. J. Mater. Prod. Technol., Volume 15 (2000), pp. 131-141
[36] Modélisation numérique du grenaillage de précontraintes: approche tridimensionnelle et dynamique, 2000 (Thèse de doctorat de l'Université de technologie de Troyes)
[37] Prévision des contraintes résiduelles dues au grenaillage de précontrainte, ENSAM, 1986 (Ph.D. thesis)
[38] Identification du comportement en plasticité et fatigue, influence du taux de recouvrement en grenaillage, ENSAM, 1995 (Ph.D. thesis)
[39] Modélisation du comportement et des contraintes résiduelles introduites dans un matériau soumis à un grenaillage, ENSAM, 1989 (Ph.D. thesis)
[40] Introduction of residual stress fields in finite element three-dimensional structures, Proceedings of the Fourth European Conference on Residual Stress, 1997
[41] Contraintes résiduelles et déformations plastiques, leurs relations mutuelles pour les pièces de géométries simples, Matér. Tech., Volume 5–6 (1996), pp. 46-50
[42] Numerical simulations of the shot peening process of materials initially treated by carburizing or carbonitriding, Arts et Métiers ParisTech, 2011 (Ph.D. thesis)
[43] Simultaneous calculation of mechanical properties and phase equilibria, J. Phase Equilib., Volume 22 (2001)
[44] Modelling the material properties and behaviour of multicomponent alloys, International Congress on FEM Technology with ANSYS CFX and ICEM CFD Conference, 2004
[45] Inverse eigenstrain analysis of the effect of non-uniform sample shape on the residual stress due to shot peening, Exp. Mech., Volume 51 (2011), pp. 165-174
[46] Mathematical modeling and implementation of residual stress mapping from microscale to macroscale finite element models, J. Manuf. Sci. Eng., Volume 134 (2012) no. 2
Cité par Sources :
Commentaires - Politique