This paper is focused on the characterization of the frequency content of vibration signals issued from a two-stage planetary gearbox. To achieve this goal, two different methodologies are adopted: the lumped-parameter modeling approach and the phenomenological modeling approach. The two methodologies aim to describe the complex vibrations generated by a two-stage planetary gearbox. The phenomenological model describes directly the vibrations as measured by a sensor fixed outside the fixed ring gear with respect to an inertial reference frame, while results from a lumped-parameter model are referenced with respect to a rotating frame and then transferred into an inertial reference frame. Two different case studies of the two-stage planetary gear are adopted to describe the vibration and the corresponding spectra using both models. Each case presents a specific geometry and a specific spectral structure.
Accepté le :
Publié le :
@article{CRMECA_2017__345_12_832_0,
author = {Nabih Feki and Maha Karray and Mohamed Tawfik Khabou and Fakher Chaari and Mohamed Haddar},
title = {Frequency analysis of a two-stage planetary gearbox using two different methodologies},
journal = {Comptes Rendus. M\'ecanique},
pages = {832--843},
publisher = {Elsevier},
volume = {345},
number = {12},
year = {2017},
doi = {10.1016/j.crme.2017.10.001},
language = {en},
}
TY - JOUR AU - Nabih Feki AU - Maha Karray AU - Mohamed Tawfik Khabou AU - Fakher Chaari AU - Mohamed Haddar TI - Frequency analysis of a two-stage planetary gearbox using two different methodologies JO - Comptes Rendus. Mécanique PY - 2017 SP - 832 EP - 843 VL - 345 IS - 12 PB - Elsevier DO - 10.1016/j.crme.2017.10.001 LA - en ID - CRMECA_2017__345_12_832_0 ER -
%0 Journal Article %A Nabih Feki %A Maha Karray %A Mohamed Tawfik Khabou %A Fakher Chaari %A Mohamed Haddar %T Frequency analysis of a two-stage planetary gearbox using two different methodologies %J Comptes Rendus. Mécanique %D 2017 %P 832-843 %V 345 %N 12 %I Elsevier %R 10.1016/j.crme.2017.10.001 %G en %F CRMECA_2017__345_12_832_0
Nabih Feki; Maha Karray; Mohamed Tawfik Khabou; Fakher Chaari; Mohamed Haddar. Frequency analysis of a two-stage planetary gearbox using two different methodologies. Comptes Rendus. Mécanique, Volume 345 (2017) no. 12, pp. 832-843. doi : 10.1016/j.crme.2017.10.001. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.1016/j.crme.2017.10.001/
[1] Dynamic tooth loads in epicyclic gears, J. Eng. Ind., Volume 94 (1974), pp. 578-584
[2] An extended model for the analysis of the dynamic behavior of planetary trains, J. Mech. Des., Volume 117 (1995), pp. 241-247
[3] Structured vibration characteristics of planetary gears with unequally spaced planets, J. Sound Vib., Volume 233 (2000), pp. 921-928
[4] Dynamic analysis of a planetary gear failure caused by tooth pitting and cracking, Eng. Fail. Anal., Volume 2 (2005), pp. 73-78
[5] Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission, Eur. J. Mech. A, Solids, Volume 27 (2008), pp. 691-705
[6] Mesh phasing relationships in planetary and epicyclic gears, J. Mech. Des., Volume 126 (2004), pp. 365-370
[7] An explanation for the asymmetry of the modulation sidebands about the tooth meshing frequency in epicyclic gear vibration, Proc. Inst. Mech. Eng., Volume 199 (1985), pp. 65-70
[8] Fourier series analysis of epicyclic gearbox vibration, J. Vib. Acoust., Volume 124 (2002), pp. 150-152
[9] A theoretical and experimental investigation of modulation sidebands of planetary gear sets, J. Sound Vib., Volume 323 (2009), pp. 677-696
[10] Contributions to the Analysis of Vibrations and Acoustic Emissions for the Condition Monitoring of Epicyclic Gearboxes, Faculty of Georesources and Materials Engineering of the RWTH Aachen University, Germany, 2009 (Dissertation)
[11] Planetary Transmission Diagnostics, 2004 (Technical Report NASA/CR 2004 213068, NAS)
[12] A Procedure for Predicting the Load Distribution and Transmission Error Characteristics of Double Helical Gears, The Ohio State University, 1991 (MS Thesis)
[13] Dynamic modeling and vibration characteristics of a two-stage closed-form planetary gear train, Mech. Mach. Theory, Volume 97 (2016), pp. 12-28
[14] Modal analysis of gearbox transmission system in bucket wheel excavator, J. Theor. Appl. Mech., Volume 55 (2017) no. 1, pp. 253-264
[15] Planetary gear train dynamics, ASME J. Mech. Des., Volume 116 (1994), pp. 713-720
[16] Contribution à l'analyse du comportement dynamique de réducteur à engrenages à axes parallèles, Institut national des sciences appliquées de Lyon, Villeurbanne, France, 1988 (PhD thesis 188 p)
[17] Dynamic analysis of bevel gear coupled to multiple stage planetary gear (excavator system), ICAMEM'2015, 20–22 December 2015, Hammamet, Tunisia (2015)
[18] Mathematical modeling and computer simulations as an aid to gearbox diagnostics, Mech. Syst. Signal Process., Volume 15 (2001) no. 5, pp. 855-871
Cité par Sources :
Commentaires - Politique
Simulating the dynamic behavior of planetary gearbox based on improved Hanning function
Oussama Graja; Bacem Zghal; Kajetan Dziedziech; ...
C. R. Méca (2019)
Safa Boudhraa; Alfonso Fernandez del Rincon; Fakher Chaari; ...
C. R. Méca (2021)
Modal energetic analysis and dynamic response of worm gear drives with a new developed dynamic model
Ala Eddin Chakroun; Ahmed Hammami; Ana De-Juan; ...
C. R. Méca (2021)