In this paper, a new method for identifying the dynamical parameters of local constraining supports such as mass, stiffness, and damping was developed through combining the measured frequency transfer functions and structural modification techniques. Since measurement noise often leads to erroneous identifications, regularization techniques have been implemented to reduce noise amplification in the inverse problem. The developed technique has been validated by numerical tests on a multi-supported flexible structure, which can be seen as an idealized electricity generator rotor shaft. The results are satisfactory for noise-free data as well as under realistic noise levels. The sensitivity of the identified support features to noise levels is asserted through a parametric study
Accepté le :
Publié le :
@article{CRMECA_2017__345_4_239_0,
author = {Ahmad Baklouti and Jos\'e Antunes and Vincent Debut and Tahar Fakhkakh and Mohamed Haddar},
title = {A method for the identification of dynamic constraint parameters in multi-supported flexible structures},
journal = {Comptes Rendus. M\'ecanique},
pages = {239--247},
publisher = {Elsevier},
volume = {345},
number = {4},
year = {2017},
doi = {10.1016/j.crme.2017.02.002},
language = {en},
}
TY - JOUR AU - Ahmad Baklouti AU - José Antunes AU - Vincent Debut AU - Tahar Fakhkakh AU - Mohamed Haddar TI - A method for the identification of dynamic constraint parameters in multi-supported flexible structures JO - Comptes Rendus. Mécanique PY - 2017 SP - 239 EP - 247 VL - 345 IS - 4 PB - Elsevier DO - 10.1016/j.crme.2017.02.002 LA - en ID - CRMECA_2017__345_4_239_0 ER -
%0 Journal Article %A Ahmad Baklouti %A José Antunes %A Vincent Debut %A Tahar Fakhkakh %A Mohamed Haddar %T A method for the identification of dynamic constraint parameters in multi-supported flexible structures %J Comptes Rendus. Mécanique %D 2017 %P 239-247 %V 345 %N 4 %I Elsevier %R 10.1016/j.crme.2017.02.002 %G en %F CRMECA_2017__345_4_239_0
Ahmad Baklouti; José Antunes; Vincent Debut; Tahar Fakhkakh; Mohamed Haddar. A method for the identification of dynamic constraint parameters in multi-supported flexible structures. Comptes Rendus. Mécanique, Volume 345 (2017) no. 4, pp. 239-247. doi : 10.1016/j.crme.2017.02.002. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.1016/j.crme.2017.02.002/
[1] Shaft whipping, Gen. Elec. Rev., Volume 27 (1924) no. 3, pp. 169-178
[2] Review of published data and their application to the design of large bearings for steam turbines, IMechE, Volume vol. 182 (1968), pp. 75-81 (Part 3A)
[3] The state of knowledge in the field of bearing-influenced rotor dynamics, Tribol. Int., Volume 13 (1980) no. 5, pp. 196-198
[4] Identification of stiffness and damping coefficient of journal bearing by impact method, Proceedings of International Conference on Vibration in Rotating Machinery, vol. C285/80, Inst. Mech. Eng., 1980, pp. 231-238
[5] Experimental determination of dynamic characteristics of a full size gas turbine tilting-pad journal bearing by an impact test method, Proc. ASME Design Engineering Division, Modal Analysis, Modeling, Diagnostics, and Control – Analytical and Experimental, vol. 38, 1991, pp. 291-298
[6] Experimental identification of mechanical joint parameters, J. Vib. Acoust., Volume 113 (1991) no. 1, pp. 28-36
[7] Experimental identification of linearized oil film coefficients of cylindrical and tilting pad bearings, ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition (V005T14A012-V005T14A012), American Society of Mechanical Engineers, 1994
[8] Identification of sixteen force coefficients of two journal bearings from impulse responses, Wear, Volume 212 (1997) no. 2, pp. 206-212
[9] Estimation of linearized dynamic characteristics of bearings using synchronous response, Int. J. Mech. Sci., Volume 37 (1995) no. 2, pp. 197-219
[10] Identification of speed-dependent bearing parameters, J. Sound Vib., Volume 254 (2002) no. 5, pp. 967-986
[11] Identification of dynamic bearing parameters: a review, Shock Vib. Dig., Volume 36 (2004) no. 2, pp. 99-124
[12] Field methods for identification of bearing support parameters—part II: identification from rotor dynamic response due to imbalances, J. Eng. Gas Turbines Power, Volume 129 (2007) no. 1, pp. 213-219
[13] Simultaneous estimation of the residual unbalance and bearing dynamic parameters from the experimental data in a rotor-bearing system, Mech. Mach. Theory, Volume 44 (2009) no. 4, pp. 792-812
[14] Bearing parameter identification of rotor-bearing system based on Kriging surrogate model and evolutionary algorithm, J. Sound Vib., Volume 332 (2013) no. 11, pp. 2659-2671
[15] Structural modifications using frequency response functions, Mech. Syst. Signal Process., Volume 4 (1990), pp. 53-63
[16] Recovering the unconstrained modes of axisymmetric structures from measurements under constrained condition, Vilnius, Lithuania (2012)
[17] An effective method for the identification of support features in multi-supported systems, Advances in Acoustics and Vibration, Springer International Publishing, 2017, pp. 301-312
[18] Matrix Computations, The John Hopkins University Press, Baltimore, MD, USA, 1996
[19] Identification of the nonlinear excitation force acting on a bow string using the dynamical responses at remote locations, Int. J. Mech. Sci., Volume 52 (2010), pp. 1419-1436
[20] Modal techniques for the remote identification of nonlinear reaction at gap-supported tubes under turbulent excitation, J. Press. Vessel Technol., Volume 132 (2010)
Cité par Sources :
Commentaires - Politique
J. Gómez-Mancilla; Jean-Jacques Sinou; V.R. Nosov; ...
C. R. Méca (2004)
Bifurcation analysis of a flexible balanced cracked rotor–bearing system
Nizar Ferjaoui; Sami Naimi; Mnaour Chouchane
C. R. Méca (2016)