[Manipulation passive d'écoulements autour du corps d'Ahmed à lunette arrière]
Une méthode de contrôle passif utilisant une interface poreuse est appliquée à l'écoulement du corps d'Ahmed à lunette arrière sur une route en dimension deux. L'écoulement à l'intérieur des différents milieux est modélisé par une méthode de pénalisation. Les résultats montrent qu'un choix approprié des milieux poreux conduit à des gains au niveau des paramètres aérodynamiques.
The control of two-dimensional flows around the Ahmed body with a rear window on top of a road is achieved using porous devices added on some parts of the body. The modelling of the flow in different media is performed by means of the penalisation method. A good choice of the location of the porous interfaces yields an improvement of the aerodynamic parameters.
Accepté le :
Publié le :
Mot clés : Mécanique des fluides numérique, Corps d'Ahmed, Interface poreuse
@article{CRMECA_2007__335_4_213_0,
author = {Charles-Henri Bruneau and Patrick Gilli\'eron and Iraj Mortazavi},
title = {Flow manipulation around the {Ahmed} body with a rear window using passive strategies},
journal = {Comptes Rendus. M\'ecanique},
pages = {213--218},
publisher = {Elsevier},
volume = {335},
number = {4},
year = {2007},
doi = {10.1016/j.crme.2007.03.003},
language = {en},
}
TY - JOUR AU - Charles-Henri Bruneau AU - Patrick Gilliéron AU - Iraj Mortazavi TI - Flow manipulation around the Ahmed body with a rear window using passive strategies JO - Comptes Rendus. Mécanique PY - 2007 SP - 213 EP - 218 VL - 335 IS - 4 PB - Elsevier DO - 10.1016/j.crme.2007.03.003 LA - en ID - CRMECA_2007__335_4_213_0 ER -
%0 Journal Article %A Charles-Henri Bruneau %A Patrick Gilliéron %A Iraj Mortazavi %T Flow manipulation around the Ahmed body with a rear window using passive strategies %J Comptes Rendus. Mécanique %D 2007 %P 213-218 %V 335 %N 4 %I Elsevier %R 10.1016/j.crme.2007.03.003 %G en %F CRMECA_2007__335_4_213_0
Charles-Henri Bruneau; Patrick Gilliéron; Iraj Mortazavi. Flow manipulation around the Ahmed body with a rear window using passive strategies. Comptes Rendus. Mécanique, Volume 335 (2007) no. 4, pp. 213-218. doi : 10.1016/j.crme.2007.03.003. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.1016/j.crme.2007.03.003/
[1] Flow Control: Passive, Active and Reactive Flow Management, Cambridge Univ. Press, 2000
[2] Contrôle des écoulements appliqué à l'automobile, état de l'art, Mécanique et Industries, Volume 3 (2002) no. 6
[3] Passive control of flow around a square cylinder using porous media, Int. J. Numer. Methods Fluids, Volume 46 (2004)
[4] S.R. Ahmed, G. Ramm, G. Falting, Some salient features of the time averaged ground vehicle wake, SAE paper 840300, 1984
[5] P. Gilliéron, A. Spohn, Flow separations generated by a simplified geometry of an automotive vehicle, in: IUTAM Symp. Unsteady Separated Flows, 2002
[6] M. Onorato, A. Costelli, A. Garonne, Measurement through wake analysis, SAE Paper 569, 1984
[7] Sur l'interaction fluide–milieu poreux: Application au calcul des efforts exercés sur un obstacle par un fluide visqueux, C. R. Acad. Sci. Paris, Sér. II, Volume 318 (1994)
[8] Effective boundary conditions for laminar flows over periodic rough boundaries, J. Comp. Phys., Volume 147 (1998)
[9] Control of vortex shedding around a pipe section using a porous sheath, Int. J. Offshore Polar Engrg., Volume 16 (2006) no. 2
[10] Sur les conditions hydrodynamiques au voisinage d'une interface milieu fluide–milieu poreux: application à la convection naturelle, C. R. Acad. Sci. Paris, Sér. II, Volume 299 (1984)
[11] A penalization method to take into account obstacles in incompressible viscous flows, Numer. Math., Volume 81 (1999)
[12] G. Carbou, Brinkmann model and double penalization method for the flow around a porous thin layer
[13] Computation of turbulent flow past an array of cylinders using a spectral method with Brinkman penalization, Eur. J. Mech. B Fluids, Volume 20 (2001)
[14] Effective downstream boundary conditions for incompressible Navier–Stokes equations, Int. J. Numer. Methods Fluids, Volume 19 (1994)
[15] The 2d lid-driven cavity problem revisited, Computers & Fluids, Volume 35 (2006) no. 3
[16] P. Gilliéron, F. Chometon, Modelling of stationary three-dimensional detached airflows around an Ahmed Reference Body, in: ESAIM Proc. 7 (1999)
[17] Detailed analysis of the overtaking process, J. Mech. Engrg., Volume 53 (2003)
Cité par Sources :
Commentaires - Politique
Benjamin Lehugeur; Patrick Gilliéron; Tanja Ivanić
C. R. Méca (2006)
Active control of the flow behind a two-dimensional bluff body in ground proximity
Sébastien Chaligné; Thomas Castelain; Marc Michard; ...
C. R. Méca (2013)
Biomimetic bluff body drag reduction by self-adaptive porous flaps
Nicolas Mazellier; Audrey Feuvrier; Azeddine Kourta
C. R. Méca (2012)