Energy harvesting mechanisms can be used to extract energy from ambient surroundings to power small electronic devices, which has a significant advantage in realizing self-sustaining wireless devices. The proposed design of this study uses the internal fluid flow within a pipe and takes advantage of the fluid–structure interaction through flow-induced vibration of a bluff body. The hybrid harvester uses the vibration to convert electrical energy through a piezoelectric material and an electromagnetic oscillator that can be tuned to resonate at the oscillation frequency. A numerical solver was used to estimate harvestable voltage for this submerged hybrid energy harvester model by using ordinary differential equations. A computational study was used to optimize the performance of the bluff bodies under the influence of the vortices for circular, triangular, ellipse, and quadrilateral shapes. Wake development was seen in the circular and triangular shapes with the ellipse having the lowest turbulence kinetic energy among the shapes. Structural deflection of the beam under resonance was compared for the different shapes, which displayed better results for triangular and elliptical bluff bodies.
Revised:
Accepted:
Published online:
Muhammad Hafizh 1; Asan G. A. Muthalif 1; Jamil Renno 1; M. R. Paurobally 1; Mohamed A. Arab 1; Issam Bahadur 2; Hassen Ouakad 2
CC-BY 4.0
@article{CRMECA_2021__349_1_65_0,
author = {Muhammad Hafizh and Asan G. A. Muthalif and Jamil Renno and M. R. Paurobally and Mohamed A. Arab and Issam Bahadur and Hassen Ouakad},
title = {A hybrid piezoelectric{\textendash}electromagnetic nonlinear vibration energy harvester excited by fluid flow},
journal = {Comptes Rendus. M\'ecanique},
pages = {65--81},
publisher = {Acad\'emie des sciences, Paris},
volume = {349},
number = {1},
year = {2021},
doi = {10.5802/crmeca.74},
language = {en},
}
TY - JOUR AU - Muhammad Hafizh AU - Asan G. A. Muthalif AU - Jamil Renno AU - M. R. Paurobally AU - Mohamed A. Arab AU - Issam Bahadur AU - Hassen Ouakad TI - A hybrid piezoelectric–electromagnetic nonlinear vibration energy harvester excited by fluid flow JO - Comptes Rendus. Mécanique PY - 2021 SP - 65 EP - 81 VL - 349 IS - 1 PB - Académie des sciences, Paris DO - 10.5802/crmeca.74 LA - en ID - CRMECA_2021__349_1_65_0 ER -
%0 Journal Article %A Muhammad Hafizh %A Asan G. A. Muthalif %A Jamil Renno %A M. R. Paurobally %A Mohamed A. Arab %A Issam Bahadur %A Hassen Ouakad %T A hybrid piezoelectric–electromagnetic nonlinear vibration energy harvester excited by fluid flow %J Comptes Rendus. Mécanique %D 2021 %P 65-81 %V 349 %N 1 %I Académie des sciences, Paris %R 10.5802/crmeca.74 %G en %F CRMECA_2021__349_1_65_0
Muhammad Hafizh; Asan G. A. Muthalif; Jamil Renno; M. R. Paurobally; Mohamed A. Arab; Issam Bahadur; Hassen Ouakad. A hybrid piezoelectric–electromagnetic nonlinear vibration energy harvester excited by fluid flow. Comptes Rendus. Mécanique, Volume 349 (2021) no. 1, pp. 65-81. doi : 10.5802/crmeca.74. https://comptes-rendus.academie-sciences.fr/mecanique/articles/10.5802/crmeca.74/
[1] Generation and storage of electricity from power harvesting devices, J. Intell. Mater. Syst. Struct., Volume 16 (2005) no. 1, pp. 67-75 | DOI
[2] Optimal piezoelectric beam shape for single and broadband vibration energy harvesting: modeling, simulation and experimental results, Mech. Syst. Signal Process., Volume 54–55 (2015), pp. 417-426 | DOI
[3] Piezoelectric energy harvesting controlled with an IGBT H-Bridge and Bi-directional Buck-Boost for Low-Cost 4G Devices, Sensors, Volume 20 (2020) no. 24, 7039 | DOI
[4] Effect of tip masses and it’s position on the power by piezoelectric material, Int. J. Eng. Sci. Comput., Volume 9 (2019) no. 4, pp. 21336-21342
[5] A study of vortex-induced energy harvesting from water using PZT piezoelectric cantilever with cylindrical extension, Ceram. Int., Volume 41 (2015) no. 1, p. S768-S773 | DOI
[6] A review of energy harvesting using piezoelectric materials: state-of-the-art a decade later (2008–2018), Smart Mater. Struct., Volume 28 (2019) no. 11, 113001 | DOI
[7] Motions, forces and mode transitions in vortex-induced vibrations at low mass-damping, J. Fluids Struct., Volume 13 (1999), pp. 813-851 | DOI
[8] Vortex-induced vibrations, Annu. Rev. Fluid Mech., Volume 36 (2004), pp. 413-455 | DOI | MR | Zbl
[9] A critical review of the intrinsic nature of vortex-induced vibrations, Volume 19 (2004), pp. 389-447
[10] Circular cylinder wakes and vortex-induced vibrations, J. Fluids Struct., Volume 27 (2011), pp. 648-658 | DOI
[11] Flow energy harvesting using piezoelectric cantilevers with cylindrical extension, IEEE Trans. Indust. Electron., Volume 60 (2013), pp. 1116-1118 | DOI
[12] Generation of electrical energy using short piezoelectric cantilevers in flowing media, Act. Pass. Smart Struct. Integ. Syst., Volume 7288 (2009), pp. 109-116
[13] Modeling and analysis of upright piezoelectric energy harvester under aerodynamic vortex-induxed vibration, Micromachines, Volume 9 (2018) no. 12, 667 | DOI
[14] The state-of-the-art review on energy harvesting from flow-induced vibrations, Appl. Energy, Volume 267 (2020), 114902 | DOI
[15] Oscillating U-shaped body for underwater piezoelectric energy harvester power optimization, Micromachines, Volume 10 (2019), 737 | DOI
[16] Performance analysis of galloping-based piezoaeroelastic energy harvesters with different cross-section geometries, J. Intell. Mater. Syst. Struct., Volume 25 (2014) no. 2, pp. 246-256 | DOI
[17] The performance of a self-excited fluidic energy harvester, Smart Mater. Struct., Volume 21 (2012) no. 2, 025007 | DOI
[18] Low velocity water flow energy harvesting using vortex induced vibration and galloping, Appl. Energy, Volume 251 (2019), 113392
[19] Energy harvesting from water flow in open channel with macro fiber composite, AIP Adv., Volume 8 (2018), 095107
[20] A coupled piezoelectric-electromagnetic energy harvesting technique for achieving increased power output through damping matching, Smart Mater. Struct., Volume 178 (2009) no. 9, 095029 | DOI
[21] Energy harvesting from sea waves with consideration of airy and JONSWAP theory and optimization of energy harvester parameters, J. Mar. Sci. Appl., Volume 14 (2015) no. 4, pp. 440-449 | DOI
[22] A novel model of piezoelectric-electromagnetic hybrid energy harvester based on vortex-induced vibration, 2017 International Conference on Green Energy and Applications (ICGEA), Singapore (2017), pp. 105-108 | DOI
[23] Design and experimental analysis of broadband energy harvesting from vortex-induced vibrations, J. Sound Vib., Volume 408 (2017), pp. 210-219 | DOI
[24] Practical Guide to Polypropylene, Rapra Technolody Ltd., Shawbury, Shrewsbury, Shropshire, 2002
[25] Polypropylene: The Definitive User’s Guide and Databook, William Andrew Publishing House, Norwich, New York, USA, 1999
[26] Power control optimization of an underwater piezoelectric energy harvester, J. Appl. Sci., Volume 8 (2018) no. 3, 389 | DOI
[27] Comparative study of conventional and magnetically coupled piezoelectric energy harvester to optimize output voltage and bandwidth, J. Microsyst. Technol., Volume 23 (2016) no. 7, pp. 2663-2674
[28] Harnessing electrical power from vortex-induced vibration of a circular cylinder, J. Fluids Struct., Volume 70 (2017), pp. 360-373 | DOI
[29] Magnetically coupled magnet-spring oscillators, Eur. J. Phys., Volume 31 (2010) no. 3, pp. 433-452 | DOI
[30] Ansys Academic Fluent, Release 2020 R2, Canonsburg, Pensylvania, 2020
[31] Two-equation eddy-viscosity turbulence models for engineering applications, Amer. Inst. Aeronaut. Astronaut., Volume 32 (1994) no. 8, pp. 1598-1605 | DOI
[32] Quantification of uncertainty in computational fluid dynamics, Annu. Rev. Fluid Mech., Volume 29 (1997), pp. 123-160 | DOI | MR
[33] Experiments on the flow past a circular cylinder at very high Reynolds number, Fluid Mech., Volume 10 (1961) no. 3, pp. 345-356 | DOI | Zbl
[34] Fluctuating lift on a circular cylinder: review and new measurements, Fluids Struct., Volume 17 (2003) no. 1, pp. 57-96 | DOI
Cited by Sources:
Comments - Policy