Comptes Rendus

Issue no. 1-2 Table of Contents

Biomimetic flow control

Editorial Board
p. IFC
Dossier Contents
p. iii-iv
Biomimetic flow control
p. 1-2
The structure and mechanical properties of dragonfly wings and their role on flyability
p. 3-17
Superhydrophobic surfaces: From the lotus leaf to the submarine
p. 18-34
On the scaling of drag reduction by reconfiguration in plants
p. 35-40
Control of vortex shedding on a circular cylinder using self-adaptive hairy-flaps
p. 41-56
Stall control with feathers: Self-activated flaps on finite wings at low Reynolds numbers
p. 57-66
Biomimetic spiroid winglets for lift and drag control
p. 67-80
Biomimetic bluff body drag reduction by self-adaptive porous flaps
p. 81-94
Stroke plane angle controls leading edge vortex in a bat-inspired flapper
p. 95-106
Control of the separated flow around an airfoil using a wavy leading edge inspired by humpback whale flippers
p. 107-114
Editorial Board
p. IBC

Issue no. 3 Table of Contents

Editorial Board
p. IFC
Steady Navier–Stokes system with nonhomogeneous boundary conditions in the axially symmetric case
p. 115-119
Limit analysis of hollow spheres or spheroids with Hill orthotropic matrix
p. 120-129
Analyse par le modèle multiphasique du comportement macroscopique de matériaux renforcés par fibres
[Analysis of the macroscopic behaviour of materials reinforced by fibres using a multiphase model]
p. 130-138
Multi-objective optimization to predict muscle tensions in a pinch function using genetic algorithm
p. 139-155
Experimental behaviour of concrete-filled rectangular thin welded steel stubs (compression load case)
p. 156-164
Investigation of the mixed flow turbine performance under inlet pulsating flow conditions
p. 165-176
Editorial Board
p. IBC

Issue no. 4-5 Table of Contents

Recent Advances in Micromechanics of Materials

Editorial Board
p. IFC
Dossier Contents
p. iii-iv
Avancées Récentes en Micromécanique des Matériaux
Numéro thématique des Comptes Rendus Mécanique en lʼhonneur dʼAndré Zaoui
p. 177-180
The construction of effective relations for waves in a composite
p. 181-192
Bounds on the volume fraction of 2-phase, 2-dimensional elastic bodies and on (stress, strain) pairs in composites
p. 193-204
A magnetically anisotropic, ellipsoidal inclusion subjected to a non-aligned magnetic field in an elastic medium
p. 205-218
Morphology and effective properties of multi-scale random sets: A review
p. 219-229
Various estimates of Representative Volume Element sizes based on a statistical analysis of the apparent behavior of random linear composites
p. 230-246
Interface controlled plastic flow modelled by strain gradient plasticity theory
p. 247-260
Generalised continuum modelling of grain size effects in polycrystals
p. 261-274
Strain localization and anisotropic correlations in a mesoscopic model of amorphous plasticity
p. 275-288
Improved constitutive description of single crystal viscoplastic deformation by dislocation climb
p. 289-295
Effective elastic properties of nanocomposites using a novel atomistic–continuum interphase model
p. 296-306
Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation
p. 307-319
Homogenization of cellular sandwich panels
p. 320-337
On modeling shape memory polymers as thermoelastic two-phase composite materials
p. 338-348
Recent advances in spatiotemporal evolution of thermomechanical fields during the solid–solid phase transition
p. 349-358
On the overall response of elastomeric solids with pressurized cavities
p. 359-368
A phenomenological model for microstructural evolution during plastic flow
p. 369-377
Incremental homogenization approach for ageing viscoelastic polycrystals
p. 378-386
Four exact relations for the effective relaxation function of linear viscoelastic composites
p. 387-399
Editorial Board
p. IBC

Issue no. 6 Table of Contents

Editorial Board
p. IFC
A more applicable notion of effective stability for Hamiltonian systems
p. 401-404
Asymptotic modeling of piezoelectric plates with electric field gradient
p. 405-410
A suitable parametrization to simulate slug flows with the Volume-Of-Fluid method
p. 411-419
Scaling of statistics in wall-bounded turbulent flows
p. 420-433
Entropy and temperature gradients thermomechanics: Dissipation, heat conduction inequality and heat equation
p. 434-443
Thermal–mechanical and isothermal fatigue of 304L stainless steel under middle range temperatures
p. 444-452
Mechanical characterization of glass/vinylester ±55° filament wound pipes by acoustic emission under axial monotonic loading
p. 453-460
Editorial Board
p. IBC

Issue no. 7 Table of Contents

Analytical and innovative solutions for heat transfer problems involving phase change and interfaces

Guest editor: M. El Ganaoui; J. Hristov

Editorial Board
p. IFC
Dossier Contents
p. iii-iv
Foreword
p. 463-465
List of referees who have worked on the articles of this thematic issue
p. 466-467
The eponymous, anonymous Joseph Stefan
p. 468-470
Solid–liquid phase change driven by internal heat generation
p. 471-476
An improved lumped analysis for transient heat conduction in different geometries with heat generation
p. 477-484
The heat-balance integral: 1. How to calibrate the parabolic profile?
p. 485-492
The heat-balance integral: 2. Parabolic profile with a variable exponent: The concept, analysis and numerical experiments
p. 493-500
On the boundary immobilization and variable space grid methods for transient heat conduction problems with phase change: Discussion and refinement
p. 501-511
Finite element solution for diffusion–convection problems with isothermal phase changes
p. 512-517
On the aptitude of the lattice Boltzmann approach for the treatment of the transient heat transfer with crack resistance
p. 518-525
LB simulation of heat transfer in flow past a square unit of four isothermal cylinders
p. 526-535
Analytical computation of transient heat transfer and macro-constriction resistance applied to thermal spraying processes
p. 536-542
Entropy generation of forced convection film condensation on a horizontal elliptical tube
p. 543-551
Editorial Board
p. IBC

Issue no. 8 Table of Contents

Editorial Board
p. IFC
The formation of filamentary structures from molten silicates: Peleʼs hair, angel hair, and blown clinker
p. 555-564
Emerging crack front identification from tangential surface displacements
p. 565-574
A second gradient continuum model accounting for some effects of micro-structure on reconstructed bone remodelling
p. 575-589
Asymptotic analysis of a viscous fluid–thin plate interaction: Periodic flow
p. 590-595
Second order model in fluid film lubrication
p. 596-601
Pipe flow of shear-thinning fluids
p. 602-618
A gradient method for viscoelastic behaviour identification of damped sandwich structures
p. 619-623
Editorial Board
p. IBC

Issue no. 9 Table of Contents

Editorial Board
p. IFC
Can cooperation slow down emergency evacuations?
p. 625-628
Mean velocity profiles of two-dimensional fully developed turbulent flows
p. 629-640
On the accuracy of analytical methods for turbulent flows near smooth walls
p. 641-645
Robust control with unknown dynamic estimation for multi-axial piezoelectric actuators with coupled dynamics
p. 646-660
A piezoelectric screw dislocation near an elliptical inhomogeneity containing a confocal rigid line
p. 661-667
Damage detection on hollow cylinders by Electro-Mechanical Impedance method: Experiments and Finite Element Modeling
p. 668-677
Editorial Board
p. IBC

Issue no. 10 Table of Contents

Editorial Board
p. IFC
General form of the Mie–Grüneisen equation of state
p. 679-687
Hierarchical homogenization of fluid saturated porous solid with multiple porosity scales
p. 688-694
Finite element modeling of interdiffusion phenomena in solid metals
p. 695-701
Mixed boundary value problem in Potential Theory: Application to the hydrodynamic impact (Wagner) problem
p. 702-705
A new paraxial asymptotic model for the relativistic Vlasov–Maxwell equations
p. 706-714
Manufacturing and mechanical properties of calcium phosphate biomaterials
p. 715-720
A dynamic sub-grid scale model for large eddy simulation of turbulent flows in a lid-driven cubical cavity
p. 721-730
Analyse des déformations discontinues pour lʼévaluation de la stabilité des digues en enrochements sous chargement sismique
[Discontinuous Deformation Analysis to assess the stability of rockfill dams under seismic loading]
p. 731-738
Editorial Board
p. IBC

Issue no. 11-12 Table of Contents

Out of Equilibrium Dynamics

Editorial Board
p. IFC
Zeldo the Younger
p. 739
Preface
p. 740-744
Gene organization inside replication domains in mammalian genomes
p. 745-757
Progress and challenges in swirling flame dynamics
p. 758-768
A simple strategy to model the effects of thermal expansion on turbulent transports in premixed flames
p. 769-776
Bifurcations at the dawn of Modern Science
p. 777-788
Local burning velocity in a Bunsen jet flame
p. 789-796
Rarefied gas correction for the bubble entrapment singularity in drop impacts
p. 797-803
A hybrid two-phase mixture model of detonation diffraction with compliant confinement
p. 804-817
A quantitative theory of vegetation patterns based on plant structure and the non-local F–KPP equation
p. 818-828
Initiation of reactive blast waves by external energy sources
p. 829-844
The “turbulent flame speed” of wrinkled premixed flames
p. 845-858
On the scaling of the mean length of streamline segments in various turbulent flows
p. 859-866
The Leidenfrost effect: From quasi-spherical droplets to puddles
p. 867-881
Ignition time of hydrogen–air diffusion flames
p. 882-893
Ultra intense laser/plasma interaction at normal incidence: Relativistic mirrors effects, high harmonics generation and absorption
p. 894-899
Detonation-propelled shocks in tubular charges as a two-phase problem
p. 900-909
Soliton-mediated compression density waves and charge density in 2d layers of underdoped cuprate-like lattices
p. 910-916
Large Eddy Simulation of turbulent flames in a Trapped Vortex Combustor (TVC) – A flamelet presumed-pdf closure preserving laminar flame speed
p. 917-932
Mixing by porous media
p. 933-943
Editorial Board
p. IBC